FE1-ETH is a single port E1/FE1 with Ethernet Bridging that provides high-speed LAN-to-WAN connectivity. Plugging directly into the 10/100Base-T port of a hub or LAN switch, the FE1-ETH provides FE1 access at connection data rates of 2.048 Mbps, and nx64 (n=1 to 32 channels). The FE1-ETH is an excellent choice for internet access as well as LAN-to-LAN services
n Have two row of LED , one indicate local status, the other indicate remote status
n Remote adjustment of velocity to the remote device is available, you can set the velocity of one side, and the velocity of the other side can auto adjust.
n Based on FPGA, easy to upgrade
n Provide 1 RJ45 for LAN,,the interface of LAN is 10/100M ,full/duplex auto-negotiation
n the interface of LAN is 10/100M ,full/duplex auto-negotiation
n LAN interface support 802.1Q(VLAN) protocol
n Provide LAN auto reset function , run more stably
n Provide two clock mode, E1 main clk and E1 line clk
n Have three LoopBack Mode: E1 interface LoopBack (ANA)、LAN interface LoopBack (DIG)、command the remote LAN interface LoopBack (REM)
n The Product incorporates V.54 compliant local/remote loopbacks and V.52 compliant 511/511E test patterns, which is be great convenient for installation and debug the device.
n 75-ohm dual coax and 120-ohm twisted-pair G.703 connections provided, support 75ohm/120ohm adapt;
n 90-260VAC & -48VDC power options and the positive and negative of DC-48V can be optional because there is the self-test circuit for the polarity inside the device
n it can realize SNMP function in our chassis installation
interface standard according with G.703
Interface Rate n×64Kbps ， n：1～32
Jitter tolerance according with G.742 and G.823.
transmission capability 1*E1
clock inter-clock, line-clock
connector BNC(75Ω), RJ45（120Ω）
E1 Impedance 75Ω(unbalance), 120Ω(balance).
10/100 Base-T interface
Interface Rate 10/100Mbps
duplex half and full duplex self-adapt.
Interface character match IEEE802.3, IEEE802.1Q (VLAN).
Connector RJ45, support auto-mdix
MAC address capability 4096
power supply AC220V; AC 110V ; DC –48V; DC +24V
power consumption ≤5W
working temperature: 0°C ~ 50°C
storage temperature: -15°C ~ +70°C
humidity 95 %